Intel SBCEGBESW1 Switch User Manual


 
802.1x Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 391
User Guidelines
The default value of this command should be changed only to adjust for unusual
circumstances, such as unreliable links or specific behavioral problems with certain
clients. and authentication servers
Example
The following example sets the number of times that the device sends an EAP-request/
identity frame to 6 .
dot1x timeout supp-timeout
The dot1x timeout supp-timeout Interface Configuration mode command sets the time
for the retransmission of an Extensible Authentication Protocol (EAP)-request frame to
the client. To return to the default configuration, use the
no form of this command.
Syntax
dot1x timeout supp-timeout seconds
no dot1x timeout supp-timeout
Parameters
seconds — Time in seconds that the device waits for a response to an EAP-request
frame from the client before resending the request. (Range: 1- 65535 seconds)
Default Configuration
Default timeout period is 30 seconds.
Command Mode
Interface configuration (Ethernet) mode
User Guidelines
The default value of this command should be changed only to adjust for unusual
circumstances, such as unreliable links or specific behavioral problems with certain
clients. and authentication servers
Console(config)# interface ethernet ext.16
Console(config-if)# dot1x max-req 6