Filter
Top Products
VLAN Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 363
Default Configuration
VID=1.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
The command adds the port as a member in the VLAN. If the port is already a member in
the VLAN (not as a native), it should be first removed from the VLAN.
Example
The following example configures VLAN number 123 as the native VLAN when Ethernet
port 1 is in trunk mode.
switchport general allowed vlan
The switchport general allowed vlan Interface Configuration mode command adds or
removes VLANs from a general port.
Syntax
switchport general allowed vlan add vlan-list [tagged | untagged]
switchport general allowed vlan remove vlan-list
Parameters
• add vlan-list — Specifies the list of VLAN IDs to be added. Separate nonconsecutive
VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs.
• remove vlan-list — Specifies the list of VLAN IDs to be removed. Separate
nonconsecutive VLAN IDs with a comma and no spaces. A hyphen designates a
range of IDs.
• tagged — Indicates that the port transmits tagged packets for the VLANs.
• untagged — Indicates that the port transmits untagged packets for the VLANs.
Console(config)# interface ethernet ext.1
Console(config-if)# switchport trunk native vlan 123