Intel SBCEGBESW1 Switch User Manual


 
Spanning-Tree Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 263
2*(Forward-Time - 1) >= Max-Age
Max-Age >= 2*(Hello-Time + 1)
Example
The following example configures the spanning tree bridge maximum-age to 10 seconds.
spanning-tree priority
The spanning-tree priority Global Configuration mode command configures the
spanning tree priority of the device. The priority value is used to determine which bridge
is elected as the root bridge. To restore the default configuration, use the
no form of this
command.
Syntax
spanning-tree priority priority
no spanning-tree priority
Parameters
priority — Priority of the bridge. (Range: 0-61440 in steps of 4096)
Default Configuration
The default bridge priority for IEEE Spanning Tree Protocol (STP) is 32768.
Command Modes
Global Configuration mode
User Guidelines
The bridge with the lowest priority is elected as the root bridge.
Example
The following example configures spanning tree priority to 12288.
Console(config)# spanning-tree max-age 10
Console(config)# spanning-tree priority 12288