Intel SBCEGBESW1 Switch User Manual


 
VLAN Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 357
User Guidelines
There are no user guidelines for this command.
Example
The following example configures VLAN 1 with IP address 131.108.1.27 and subnet
mask 255.255.255.0.
interface range vlan
The interface range vlan Global Configuration mode command enables simultaneously
configuring multiple VLANs.
Syntax
interface range vlan {vlan-range | all}
Parameters
vlan-range — Specifies a list of VLAN IDs to be added. Separate nonconsecutive
VLAN IDs with a comma and no spaces; a hyphen designates a range of IDs.
all — All existing static VLANs.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Commands under the interface range context are executed independently on each
interface in the range. If the command returns an error on one of the interfaces, an error
message is displayed and execution of the command continues on the other interfaces.
Configuring all ports may consume an excessive amount of time. Define only the required
ports to save time.
Console(config)# interface vlan 1
Console(config-if)# ip address
131.108.1.27 255.255.255.0