Intel SBCEGBESW1 Switch User Manual


 
QoS Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 165
17 QoS Commands
qos
The qos Global Configuration mode command enables quality of service (QoS) on the
device. To disable QoS on the device, use the
no form of this command.
Syntax
qos [basic | advanced | service]
no qos
Parameters
basic — QoS basic mode.
advanced — QoS advanced mode, which enables the full range of QoS configuration.
service — QoS service mode, which enables the user to define QOS in a simpler
manner.
Default Configuration
The QoS basic mode is enabled.
Command Mode
Global Configuration mode
User Guidelines
When the QoS service mode is enabled, Access Control Lists (ACLs) are no longer
available. Instead the user is prompted to import pre-defined ACLs as Flow Classification
Lists (FCLs).
Example
The following example enables QoS on the device.
Console(config)# qos