Intel SBCEGBESW1 Switch User Manual


 
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 121
10 IP Address Commands
ip address
ip address ip-address {mask | prefix-length}
The ip address Interface Configuration (Ethernet, VLAN, port-channel) mode command
sets an IP address. To remove an IP address, use the no form of this command.
Syntax
ip address ip-address {mask | prefix-length}
no ip address [ip-address]
Parameters
ip-address — Specifies the valid IP address
mask — Specifies the valid network mask of the IP address.
prefix-length — Specifies the number of bits that comprise the IP address prefix. The
prefix length must be preceded by a forward slash (/). (Range: 8-30)
Default Configuration
No IP address is defined for interfaces.
Command Mode
Interface Configuration (Ethernet, VLAN, port-channel) mode
User Guidelines
An IP address cannot be configured for a range of interfaces (range context).
This command is only functional if the device is in Switch mode.