Intel SBCEGBESW1 Switch User Manual


 
AAA Commands
18 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Default Configuration
No enable password is defined.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets a local level 15 password called `secret' to control access to
user and privilege levels.
username
The username Global Configuration mode command creates a user account in the local
database. To remove a user name, use the no form of this command.
Syntax
username name [password password] [level level] [encrypted]
no username name
Parameters
name — The name of the user. (Range: 1-20 characters)
password — The authentication password for the user. (Range: 1-159 characters)
level — The user level (Range: 1-15). If a level is not specified, the level is
automaically set to 1.
encrypted — Encrypted password entered, copied from another device configuration.
Default Configuration
No user is defined.
Console(config)# enable password secret level 15