Intel SBCEGBESW1 Switch User Manual


 
Port Channel Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 159
Syntax
channel-group port-channel-number mode {on | auto}
no channel-group
Parameters
port-channel_number — Specifies the number of the valid port-channel for the
current port to join.
on — Forces the port to join a channel without an LACP operation.
auto — Allows the port to join a channel as a result of an LACP operation.
Default Configuration
The port is not assigned to a port-channel.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example forces port 1 to join port-channel 1 without an LACP operation.
show interfaces port-channel
The show interfaces port-channel Privileged EXEC mode command displays port-
channel information.
Syntax
show interfaces port-channel [port-channel-number]
Console(config)# interface ethernet ext.1
Console(config-if)# channel-group 1 mode on