Filter
Top Products
IP Address Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 125
Example
The following example the displays the configured IP interfaces and their types
arp
The arp Global Configuration mode command adds a permanent entry in the Address
Resolution Protocol (ARP) cache. To remove an entry from the ARP cache, use the
no
form of this command.
Syntax
arp ip_addr hw_addr {ethernet interface-number | vlan vlan-id | port-channel port-
channel number.
}
no arp ip_addr {ethernet interface-number | vlan vlan-id | port-channel port-channel
number.
}
Parameters
• ip_addr — Valid IP address or IP alias to map to the specified MAC address.
• hw_addr — Valid MAC address to map to the specified IP address or IP alias.
• interface-number — Valid Ethernet port.
• vlan-id — Valid VLAN number.
• port-channel number. — Valid port-channel number.
Default Configuration
This command has no default configuration.
Console#
show ip interface
Proxy ARP is disabled
IP address I/F Type Direct
Broadca
st
------------- --------- -------
-------
--
10.7.1.192/24 1 Static disable
10.7.2.192/24 2 Static disable