Filter
Top Products
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 307
24 Syslog Commands
logging on
The logging on Global Configuration mode command controls error message logging.
This command sends debug or error messages to a logging process, which logs messages
to designated locations asynchronously to the process that generated the messages. To
disable the logging process, use the
no form of this command.
Syntax
logging on
no logging on
Default Configuration
Logging is enabled.
Command Mode
Global Configuration mode
User Guidelines
The logging process controls the distribution of logging messages at various destinations,
such as the logging buffer, logging file or syslog server. Logging on and off at these
destinations can be individually configured using the
logging buffered, logging file, and
logging Global Configuration mode commands. However, if the logging on command is
disabled, no messages are sent to these destinations. Only the console receives messages.
Example
The following example enables logging error messages.
Console(config)# logging on