Intel SBCEGBESW1 Switch User Manual


 
LACP Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 137
short — Specifies the short timeout value.
Default Configuration
The default port timeout value is long.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example assigns a long administrative LACP timeout to Ethernet port 6 .
show lacp ethernet
The show lacp ethernet Privileged EXEC mode command displays LACP information
for Ethernet ports.
Syntax
show lacp ethernet interface [parameters | statistics | protocol-state]
Parameters
interface — Valid Ethernet port. (Full syntax: unit/port)
parameters — Link aggregation parameter information.
statistics — Link aggregation statistics information.
protocol-state — Link aggregation protocol-state information.
Default Configuration
This command has no default configuration.
Console(config)# interface ethernet ext.6
Console(config-if)# lacp timeout long