Intel SBCEGBESW1 Switch User Manual


 
Ethernet Configuration Commands
98 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
port storm-control include-multicast (GC)
The port storm-control include-multicast Interface Configuration mode command
enables counting multicast packets in the
port storm-control broadcast rate command.
To disable counting multicast packets, use the
no form of this command.
Syntax
port storm-control include-multicast
no port storm-control include-multicast
Default Configuration
Multicast packets are not counted.
Command Modes
Interface Configuration (Ethernet) mode
User Guidelines
To control multicasts storms, use the port storm-control broadcast enable and port
storm-control broadcast rate
commands.
Example
The following example enables counting multicast packets.
port storm-control include-multicast (IC)
The port storm-control include-multicast Interface Configuration (Ethernet) mode
command counts multicast packets in broadcast storm control. To disable counting
multicast packets, use the
no form of this command.
Syntax
port storm-control include-multicast [unknown-unicast]
no port storm-control include-multicast
Console#
configure
Console(config-if)#
port storm-control include-multicast
Console(config-if)# port storm-control iinclude-multicast unknown-unicast