Intel SBCEGBESW1 Switch User Manual


 
Address Table Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 33
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all static entries in the bridge-forwarding database are displayed.
show bridge address-table count
The show bridge address-table count Privileged EXEC mode command displays the
number of addresses present in the Forwarding Database.
Syntax
show bridge address-table count [vlan vlan] [ethernet interface-number | port-channel
port-channel-number]
Parameters
vlan — Specifies a valid VLAN, such as VLAN 1.
Console#
show bridge address-table static
Aging time is 300 sec
vlan mac address port type
---- ----------------- ---- -----------------
1 00:60:70:4C:73:FF 8 Permanent
1 00:60.70.8C.73:FF 8 delete-on-timeout
200 00:10:0D:48:37:FF 9 delete-on-reset