Intel SBCEGBESW1 Switch User Manual


 
Port Monitor Commands
162 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
The following restrictions apply to ports configured to be source ports:
The port cannot be already configured as a destination port.
Example
The following example copies traffic on port 8 (source port) to port 1 (destination port).
port monitor vlan-tagging
The port monitor Interface Configuration (Ethernet) mode command transmits tagged
ingress mirrored packets. To transmit untagged ingress mirrored packets, use the
no form
of this command.
Syntax
port monitor vlan-tagging
no port monitor vlan-tagging
Default Configuration
Ingress mirrored packets are transmitted untagged.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures all ingress mirrored packets from port 9 to be
transmitted as tagged packets.
Console(config)# interface ethernet ext.11
Console(config-if)# port monitor ext.8
Console (config)# interface ethernet ext.9
Console (config-if)# port monitor vlan-tagging