Filter
Top Products
VLAN Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 365
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the PVID for Ethernet port 1, when the interface is in
general mode.
switchport general ingress-filtering disable
The switchport general ingress-filtering disable Interface Configuration mode
command disables port ingress filtering. To return to the default configuration, use the
no
form of this command.
Syntax
switchport general ingress-filtering disable
no switchport general ingress-filtering disable
Default Configuration
Ingress filtering is enabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example disables port ingress filtering on Ethernet port 1
Console(config)# interface ethernet ext.1
Console(config-if)# switchport general pvid 234
Console(config)# interface ethernet ext.1
Console(config-if)# switchport general ingress-filtering disable