Intel SBCEGBESW1 Switch User Manual


 
LACP Commands
136 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Syntax
lacp port-priority value
no lacp port-priority
Parameters
value — Specifies port priority. (Range: 1-65535)
Default Configuration
The default port priority is 1.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example defines the priority of Ethernet port 6 as 247.
lacp timeout
The lacp timeout Interface Configuration (Ethernet) mode command assigns an
administrative LACP timeout. To return to the default configuration, use the
no form of
this command.
Syntax
lacp timeout {long | short}
no lacp timeout
Parameters
long — Specifies the long timeout value.
Console(config)# interface ethernet ext.6
Console(config-if)# lacp port-priority 247