Filter
Top Products
VLAN Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 367
Parameters
• add vlan-list — Specifies the list of VLAN IDs to be added. Separate nonconsecutive
VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs.
• remove vlan-list — Specifies the list of VLAN IDs to be removed. Separate
nonconsecutive VLAN IDs with a comma and no spaces. A hyphen designates a
range of IDs.
Default Configuration
All VLANs are allowed.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
This command can be used to prevent GVRP from automatically making the specified
VLANs active on the selected ports.
Example
The following example forbids adding VLAN IDs 234 to 256 to Ethernet port 1.
ip internal-usage-vlan
The ip internal-usage-vlan Interface Configuration mode command reserves a VLAN as
the internal usage VLAN of an interface. To return to the default configuration, use the
no
form of this command.
Syntax
ip internal-usage-vlan vlan-id
no ip internal-usage-vlan
Parameters
• vlan-id — Specifies the ID of the internal usage VLAN.
Console(config)# interface ethernet ext.1
Console(config-if)# switchport forbidden vlan add 234-256