Intel SBCEGBESW1 Switch User Manual


 
Clock Commands
62 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Example
The following example enables SNTP anycast clients.
sntp client enable (Interface)
The sntp client enable Interface Configuration (Ethernet, port-channel, VLAN) mode
command enables the Simple Network Time Protocol (SNTP) client on an interface. This
applies to both receive broadcast and anycast updates. To disable the SNTP client, use the
no form of this command.
Syntax
sntp client enable
no sntp client enable
Default Configuration
The SNTP client is disabled on an interface.
Command Mode
Interface Configuration (Ethernet, port-channel, VLAN) mode
User Guidelines
Use the sntp broadcast client enable Global Configuration mode command to enable
broadcast clients globally.
Use the
sntp anycast client enable Global Configuration mode command to enable
anycast clients globally.
Example
The following example enables the SNTP client on Ethernet port 3.
console(config)#
sntp anycast client enable
Console(config)#
interface ethernet
ext.3
Console(config-if)#
sntp client enable