Filter
Top Products
AAA Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 11
Default Configuration
If the default list is not set, only the enable password is checked. This has the same effect
as the command
aaa authentication enable default enable.
Command Mode
Global Configuration mode
User Guidelines
The default and optional list names created with the aaa authentication enable command
are used with the
enable authentication command.
The additional methods of authentication are used only if the previous method returns an
error, not if it fails. To ensure that the authentication succeeds even if all methods return
an error, specify none as the final method in the command line.
All
aaa authentication enable default requests sent by the device to a RADIUS or
TACACS+ server include the username $enabx$., where x is the requested privilege level.
Example
The following example sets the enable password for authentication when accessing higher
privilege levels.
login authentication
The login authentication Line Configuration mode command specifies the login
authentication method list for a remote telnet or console. To restore the default
configuration specified by the
aaa authentication login command, use the no form of this
command.
line Uses the line password for authentication.
none Uses no authentication.
radius Uses the list of all RADIUS servers for authentication. Uses username
$enabx$., where x is the privilege level.
tacacs Uses the list of all TACACS+ servers for authentication. Uses username
"$enabx$." where x is the privilege level.
Keyword Description
Console(config)# aaa authentication enable default enable