Filter
Top Products
IP Address Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 129
Default Configuration
IP Domain Naming System (DNS)-based host name-to-address translation is enabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables IP Domain Naming System (DNS)-based host name-to-
address translation
.
ip domain-name
The ip domain-name Global Configuration mode command defines a default domain
name used by the software to complete unqualified host names (names without a dotted-
decimal domain name). To remove the default domain name, use the
no form of this
command.
Syntax
ip domain-name name
no ip domain-name
Parameters
• name — Specifies the default domain name used to complete unqualified host names.
Do not include the initial period that separates an unqualified name from the domain
name. (Range: 1-158 characters)
Default Configuration
A default domain name is not defined.
Command Mode
Global Configuration mode
Console(config)# ip domain-lookup