Filter
Top Products
RADIUS Commands
216 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
The port number for authentication requests is 1812.
The usage type is
all.
Command Mode
Global Configuration mode
User Guidelines
To specify multiple hosts, multiple radius-server host commands can be used.
If no host-specific timeout, retries, deadtime or key-string values are specified, global
values apply to each RADIUS server host.
The address type of the source parameter must be the same as the
ip-address parameter.
Example
The following example specifies a RADIUS server host with IP address 192.168.10.1,
authentication request port number 20 and a 20-second timeout period.
radius-server key
The radius-server key Global Configuration mode command sets the authentication and
encryption key for all RADIUS communications between the device and the RADIUS
daemon. To restore the default configuration, use the
no form of this command.
Syntax
radius-server key [key-string]
no radius-server key
Parameters
• key-string — Specifies the authentication and encryption key for all RADIUS
communications between the device and the RADIUS server. This key must match
the encryption used on the RADIUS daemon.
(Range: 0-128 characters)
Console(config)# radius-server host 192.168.10.1 auth-port 20 timeout 20