Intel SBCEGBESW1 Switch User Manual


 
SNMP Commands
244 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
The show running-config Privileged EXEC mode command does not display the SNMP
engine ID configuration. To see the SNMP engine ID configuration, enter the
snmp-
server engineID local
Global Configuration mode command.
Example
The following example enables SNMPv3 on the device and sets the local engine ID of the
device to the default value.
snmp-server enable traps
The snmp-server enable traps Global Configuration mode command enables the device
to send SNMP traps. To disable SNMP traps, use the
no form of the command.
Syntax
snmp-server enable traps
no snmp-server enable traps
Default Configuration
SNMP traps are enabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables SNMP traps.
Console(config) #
snmp-server engineID local default
Console(config)# snmp-server enable traps