Filter
Top Products
IP Address Commands
130 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
User Guidelines
There are no user guidelines for this command.
Example
The following example defines default domain name www.intel.com.
ip name-server
The ip name-server Global Configuration mode command defines the available name
servers. To remove a name server, use the
no form of this command.
Syntax
ip name-server server-address [server-address2 … server-address8]
no ip name-server [server-address1 … server-address8]
Parameters
server-address — Specifies IP addresses of the name server.
Default Configuration
No name server addresses are specified.
Command Mode
Global Configuration mode
User Guidelines
The preference of the servers is determined by the order in which they were entered.
Up to 8 servers can be defined using one command or using multiple commands.
Example
The following example sets the available name server..
Console(config)#
ip domain-name
www.intel.com
Console(config)#
ip name-server
176.16.1.18