Filter
Top Products
VLAN Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 373
map protocol protocols-group
The map protocol protocols-group VLAN database command adds a special protocol to
a named group of protocols, which may be used for protocol-based VLAN assignment. To
delete a protocol from a group, use the
no form of this command.
Syntax
map protocol protocol [encapsulation] protocols-group group
no map protocol protocol
encapsulation
Parameters
• protocol — The protocol is a protocol number or one of the reserved names. The
format is Hex format.
• encapsulation — One of the following values: ethernet, rfc1042, llcOther. If no
option is indicated the default is
ethernet.
• group — Group number of group of protocols associated together. (Range: 1-
2147483647)
Default Configuration
This command has no default configuration.
Forbidden VLANS:
VLAN Name
---- ----
73 out
Port 29
Static configuration:
PVID: 2922
Ingress Filtering: Enabled
Acceptable Frame Type: Untagged
GVRP status: Disabled