Filter
Top Products
RADIUS Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 219
Example
The following example configures the source IP address used for communication with all
RADIUS servers to 10.1.1.1.
radius-server timeout
The radius-server timeout Global Configuration mode command sets the interval during
which the device waits for a server host to reply. To restore the default configuration, use
the
no form of this command.
Syntax
radius-server timeout timeout
no radius-server timeout
Parameters
• timeout — Specifies the timeout value in seconds. (Range: 1-30)
Default Configuration
The timeout value is 3 seconds.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the timeout interval on all RADIUS servers to 5
seconds.
console(config)# radius-server source-ip 10.1.1.1
Console(config)# radius-server timeout 5