Filter
Top Products
Spanning-Tree Commands
264 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
spanning-tree disable
The spanning-tree disable Interface Configuration mode command disables spanning
tree on a specific port. To enable spanning tree on a port, use the
no form of this
command.
Syntax
spanning-tree disable
no spanning-tree disable
Default Configuration
Spanning tree is enabled on all ports.
Command Modes
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example disables spanning-tree on Ethernet port 5.
spanning-tree cost
The spanning-tree cost Interface Configuration mode command configures the spanning
tree path cost for a port. To restore the default configuration, use the
no form of this
command.
Syntax
spanning-tree cost cost
no spanning-tree cost
Console(config)# interface ethernet ext.5
Console(config-if)# spanning-tree disable