Intel SBCEGBESW1 Switch User Manual


 
Ethernet Configuration Commands
96 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
The following example displays counters for Ethernet port 1.
The following table describes the fields shown in the display.
Console#
show interfaces counters ethernet ext.
1
Port InOctets InUcastPkts InMcastPkts InBcastPkts
------ ----------- -------------- ----------- -----------
1 183892 0 0 0
Port OutOctets OutUcastPkts OutMcastPkts OutBcastPkts
------ ----------- -------------- ------------ ------------
19188 0 0 0
FCS Errors: 0
Single Collision Frames: 0
Late Collisions: 0
Excessive Collisions: 0
Oversize Packets: 0
Internal MAC Rx Errors: 0
Received Pause Frames: 0
Transmitted Pause Frames: 0
Field Description
InOctets Counted received octets.
InUcastPkts Counted received unicast packets.
InMcastPkts Counted received multicast packets.
InBcastPkts Counted received broadcast packets.
OutOctets Counted transmitted octets.
OutUcastPkts Counted transmitted unicast packets.
OutMcastPkts Counted transmitted multicast packets.
OutBcastPkts Counted transmitted broadcast packets.
FCS Errors Counted received frames that are an integral number of octets in length but do
not pass the FCS check.
Single Collision Frames Counted frames that are involved in a single collision, and are subsequently
transmitted successfully.
Late Collisions Number of times that a collision is detected later than one slotTime into the
transmission of a packet.
Excessive Collisions Number of excessive collisions received on the selected interface.
Oversize Packets Counted frames received that exceed the maximum permitted frame size.