Filter
Top Products
Configuration and Image File Commands
72 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Parameters
• url — The location URL or reserved keyword of the file to be deleted. (Range: 1-160
characters)
The following table displays keywords and URL prefixes:
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
*.sys, *.prv, image-1 and image-2 files cannot be deleted.
Example
The following example deletes the file called ‘test’ from the flash memory.
boot system
The boot system Privileged EXEC mode command specifies the system image that the
device loads at startup.
Syntax
boot system {image-1 | image-2}
Parameters
• image-1 — Specifies image 1 as the system startup image.
• image-2 — Specifies image 2 as the system startup image.
Keyword Source or Destination
flash: Source or destination URL for flash memory. It’s the default in case a URL is specified
without a prefix.
startup-config Represents the startup configuration file.
Console#
delete flash:
test
Delete flash:test? [confirm]