Filter
Top Products
SNMP Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 239
• oid-tree — Specifies the object identifier of the ASN.1 subtree to be included or
excluded from the view. To identify the subtree, specify a text string consisting of
numbers, such as 1.3.6.2.4, or a word, such as system. Replace a single subidentifier
with the asterisk (*) wildcard to specify a subtree family; for example 1.3.*.4.
• included — Indicates that the view type is included.
• excluded — Indicates that the view type is excluded.
Default Configuration
No view entry exists.
Command Mode
Global Configuration mode
User Guidelines
This command can be entered multiple times for the same view record.
The number of views is limited to 64.
No check is made to determine that a MIB node corresponds to the "starting portion" of
the OID until the first wildcard.
Example
The following example creates a view that includes all objects in the MIB-II system group
except for sysServices (System 7) and all objects for interface 1 in the MIB-II interface
group.
snmp-server group
The snmp-server group Global Configuration mode command configures a new Simple
Management Protocol (SNMP) group or a table that maps SNMP users to SNMP views.
To remove a specified SNMP group, use the
no form of this command.
Syntax
snmp-server group groupname {v1 | v2 | v3 {noauth | auth | priv} [notify notifyview]}
[
read readview] [write writeview]
Console(config)#
snmp-server view
user-view system
included
Console(config)#
snmp-server view
user-view system.7
excluded
Console(config)#
snmp-server view
user-view ifEntry.*.1
included