Intel SBCEGBESW1 Switch User Manual


 
IP Address Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 123
If the device is configured to obtain its IP address from a DHCP server, it sends a
DHCPDISCOVER message to provide information about itself to the DHCP server on the
network.
If the
ip address dhcp command is used with or without the optional keyword, the DHCP
option 12 field (host name option) is included in the DISCOVER message. By default, the
specified DHCP host name is the globally configured host name of the device. However,
the
ip address dhcp hostname host-name command can be used to place a different host
name in the DHCP option 12 field.
The
no ip address dhcp command deconfigures any IP address that was acquired, and
sends a DHCPRELEASE message.
Example
The following example acquires an IP address for Ethernet port 16 from DHCP..
ip default-gateway
The ip default-gateway Global Configuration mode command defines a default gateway
(device). To restore the default configuration, use the no form of this command.
Syntax
ip default-gateway ip-address
no ip default
-gateway
Parameters
ip-address — Specifies the valid IP address of the currently defined default gateway.
Default Configuration
No default gateway is defined.
Command Mode
Global Configuration mode
Console(config)# interface ethernet ext.16
Console(config-if)# ip address dhcp