Intel SBCEGBESW1 Switch User Manual


 
System Management Commands
326 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Special Telnet Sequences
At any time during an active Telnet session, Telnet commands can be listed by pressing
the Ctrl-shift-6-? keys at the system prompt.
A sample of this list follows. Note that the Ctrl-shift-6 sequence appears as ^^ on the screen.
Several concurrent Telnet sessions can be opened and switched. To open a subsequent
session, the current connection has to be suspended by pressing the escape sequence keys
(Ctrl-shift-6) and x to return to the system command prompt. Then open a new connection
with the
telnet User EXEC mode command.
Keywords Table
Telnet Sequence Purpose
Ctrl-shift-6-b Break
Ctrl-shift-6-c Interrupt Process (IP)
Ctrl-shift-6-h Erase Character (EC)
Ctrl-shift-6-o Abort Output (AO)
Ctrl-shift-6-t Are You There? (AYT)
Ctrl-shift-6-u Erase Line (EL)
Console> ‘Ctrl-shift-6’ ?
[Special telnet escape help]
^^ B sends telnet BREAK
^^ C sends telnet IP
^^ H sends telnet EC
^^ O sends telnet AO
^^ T sends telnet AYT
^^ U sends telnet EL
Ctrl-shift-6 x suspends the session (return to system command prompt)
Options Description
/echo Enables local echo.
/quiet Prevents onscreen display of all messages from the software.
/source-interface Specifies the source interface.
/stream Turns on stream processing, which enables a raw TCP stream with no Telnet
control sequences. A stream connection does not process Telnet options and
can be appropriate for connections to ports running UNIX-to-UNIX Copy
Program (UUCP) and other non-Telnet protocols.
Ctrl-shift-6 x Return to System Command Prompt