Intel SBCEGBESW1 Switch User Manual


 
802.1x Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 387
Parameters
seconds — Number of seconds between re-authentication attempts. (Range:
300-4294967295)
Default Configuration
Re-authentication period is 3600 seconds.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the number of seconds between re-authentication attempts, to
300.
dot1x re-authenticate
The dot1x re-authenticate Privileged EXEC mode command manually initiates a re-
authentication of all 802.1x-enabled ports or the specified 802.1x-enabled port.
Syntax
dot1x re-authenticate [ethernet interface]
Parameters
interface — Valid Ethernet port. (Full syntax: unit/port)
Default Configuration
This command has no default configuration.
Console(config)# interface ethernet ext.16
Console(config-if)# dot1x timeout re-authperiod 300