Intel SBCEGBESW1 Switch User Manual


 
Address Table Commands
30 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Parameters
lock — Saves the current dynamic MAC addresses associated with the port and
disables learning, relearning and aging.
mac-addresses — Deletes the current dynamic MAC addresses associated with the
port and learns up to the maximum number addresses allowed on the port. Relearning
and aging are enabled.
Default Configuration
This setting is disabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, port security mode is set to dynamic for Ethernet interface 1.
port security routed secure-address
The port security routed secure-address Interface Configuration (Ethernet, port-channel)
mode command adds a MAC-layer secure address to a routed port. Use the no form of this
command to delete a MAC address.
Syntax
port security routed secure-address mac-address
no port security routed secure-address mac-address
Parameters
mac-address — A valid MAC address.
Console(config)#
interface ethernet
ext.1
Console(config-if)#
port security mode mac-addresses