Filter
Top Products
AlliedWare Plus Version 2.2.4 Management Software Web Browser User’s Guide
105
When an edge port starts to receive BPDUs, the switch no longer
considers the port as an edge port.
Link Type— Choose from the following settings:
AUTO: The switch determines the link type of the port is either
PTP or Shared. If a port is set to full-duplex mode, the link type
is point-to-point. If a port is set to half-duplex mode, the link
type is shared.
PTP: Allows the port rapid transition to the forwarding state
during the convergence process of the spanning tree domain.
Shared: Disables rapid transition. You may want to set the link
type to shared if the port is connected to a hub with multiple
switches connected to it.
Loop Guard— Enable or disable the BPDU loop-guard feature on
the port. If a port with the loop guard activated stops receiving
BPDU packets, the switch automatically shut down the port. A port
that is disabled by the feature remains in that state until it begins to
receive BPDU packets again or the switch is reset. The default
setting for BPDU loop-guard on the ports is disabled.
Root Guard— Enable or disable the Root Guard feature.
6. Click Apply.
7. Click SAVE
to save your changes to the startup configuration file.