Filter
Top Products
AlliedWare Plus Version 2.2.4 Management Software Web Browser User’s Guide
335
Displaying LLDP and LLDP-MED Settings
To display the LLDP Civic, Coordinate, and ELIN locations, use the
following procedures:
“Displaying the Basic LLDP Configuration” on page 335
“Displaying LLDP Port Assignments” on page 336
“Displaying Port Locations” on page 337
“Displaying LLDP TLV” on page 337
“Displaying LLDP-MED TLV” on page 339
For information about configuring LLDP and LLDP-MED, see “Assigning
LLDP Locations to a Port” on page 322
Displaying the
Basic LLDP
Configuration
To display the basic LLDP configuration, do the following:
1. Select the Discovery & Monitoring tab.
The Discovery & Monitoring tab is displayed. See Figure 123 on
page 302.
2. From the Discovery & Monitoring tab, select LLDP.
The LLDP tab appears to the right.
3. From the LLDP tab, select the Basic Configuration tab.
The LLDP Configuration page is displayed. See Figure 124 on page
303.
The following fields are displayed:
Status— Indicates whether LLDP is enabled or disabled on the
switch.
Timer— Indicates the transmit interval.
Fast Start Count— Indicates the fast start count for LLDP-MED.
The fast start count determines how many fast start
advertisements LLDP sends from a port when it begins sending
LLDP-MED advertisements from a port, for instance when it
detects a new LLDP-MED capable device.
Holdtime Multiplier— Indicates the holdtime multiplier value. The
transmit interval is multiplied by the holdtime multiplier to give the
Time To Live (TTL) the switch advertises to the neighbors.
Non Strict Med TLV Order Check— Indicates whether the switch
accepts LLDP-MED advertisements when the TLVs are not in the
standard order, as specified in ANSI/TIA-1057.