Chapter 25: LLDP and LLDP-MED
302
Enabling and Configuring LLDP on the Switch
To enable LLDP and set the basic LLDP configuration to the switch, do the
following:
1. Select the Discovery & Monitoring tab.
The Discovery & Monitoring tab is displayed. See Figure 123.
Figure 123. Discovery & Monitoring Tab
2. From the Discovery & Monitoring tab, select LLDP.
The LLDP tab appears to the right.
3. From the LLDP tab, select the Basic Configuration tab.
The LLDP Configuration page is displayed. See Figure 124 on page
303.