Filter
Top Products
Chapter 11: Setting Port-based and Tagged VLANs
148
Assigning a Native VLAN
A VLAN can be assigned to a tagged port so that untagged ingress traffic
is placed on the VLAN. This VLAN is referred to as the native VLAN.
To assign a native VLAN to a tagged port, perform the following
procedure:
1. Select the Switching tab.
The Switching tab is displayed. See Figure 24 on page 69.
2. From the Switching tab, select VLANs.
The VLANs page is displayed. See Figure 51 on page 142.
3. From the VLANs page, click Add
.
The Add VLAN page is displayed. See Figure 52 on page 143.
4. From Add VLANs page, click Native VLAN
.
The Native VLAN page is displayed. See Figure 54.
Figure 54. Native VLAN Page