Filter
Top Products
AlliedWare Plus Version 2.2.4 Management Software Web Browser User’s Guide
45
Configuring a Telnet or SSH Server
The AlliedWare Plus Web Browser interface allows you to configure the
switch as a Telnet or SSH server.
You can use the web browser interface to enable a Telnet server, but not
as a Telnet client. The Telnet client is only supported from the CLI. For
information about how to use a Telnet client, see the AlliedWare Plus
Management Software Version 2.2.4 Command Line Interface User’s
Guide.
To enable an SSH server in the Web interface, you must first create an
encryption key in the CLI interface. Then you can enable the SSH server in
the web interface.
To assign the switch to a Telnet or SSH server, do the following:
1. From the home page, select the System tab.
The System Settings tab is displayed. See Figure 9 on page 41.
2. From the System Settings tab, select Services.
The System Services page is displayed. See Figure 13.
Figure 13. System Services Page