AlliedWare Plus Version 2.2.4 Management Software Web Browser User’s Guide
145
Modifying VLANs
To modify the LACP Trunk settings, see the following procedure:
Caution
Modifying the VLAN membership of active ports may cause loss of
connectivity to the switch.
1. Select the Switching tab.
The Switching tab is displayed. See Figure 24 on page 69.
2. From the Switching tab, select VLANs.
The VLANs page is displayed. See Figure 51 on page 142.
3. From the VLANs page, click Edit
next to the VLAN ID that you want to
modify.
The Modify VLAN page is displayed. See Figure 53 on page 146.