Filter
Top Products
AlliedWare Plus Version 2.2.4 Management Software Web Browser User’s Guide
339
Displaying
LLDP-MED TLV
To display LLDP-MED TLV settings, do the following:
1. Select the Discovery & Monitoring tab.
The Discovery & Monitoring tab is displayed. See Figure 123 on
page 302.
2. From the Discovery & Monitoring tab, select LLDP and then select
TLV.
The LLDP TLV tab is displayed. See Figure 127 on page 308.
3. From the LLDP TLV tab, select TLV-MED.
The LLDP-Med TLV page is displayed. See Figure 139 on page 324.
The following fields are displayed:
Interface— Indicates the port ID.
Capabilities— Indicates the device’s router and bridge functions,
and whether or not these functions are currently enabled.
Network-policy— Indicates the network policy information
specified on the port for connected media endpoint devices. The
switch supports Application Type 1: Voice, including the following
network policy for connected voice devices to use for voice data:
- Voice VLAN ID
- Voice VLAN Class of Service (CoS) priority
- Voice VLAN Diffserv Code Point (DSCP)
Location— Indicates location information specified for the port, in
one or more of the following formats:
- Civic location
- Coordinate location
- Emergency Location Identification Number (ELIN)
Inventory-management— Indicates the current hardware
platform and the software version, identical on every port on the
switch:
- Hardware Revision
- Firmware Revision
- Software Revision
- Serial Number
- Manufacturer Name