Filter
Top Products
Chapter 21: Setting Static Routes
266
The following fields are displayed:
Destination— Indicates the destination network address.
Network Mask— Indicates the subnet mask of the destination
network address.
Nexthop— Indicates the IP address of the next hop to the route.
Interface— Indicates the VLAN ID of the interface.
Protocol— Indicates how this route is established.
“Static” indicates that the route was added statically; “RIP”
indicates that the route was added dynamically using the RIP
protocol; “Connected” indicates that the route is connected directly.
AD/Metric— Indicates the value of the administrative distance
specified to the route, and the number of routing devices a packet
must travel through to reach the destination.