Filter
Top Products
AlliedWare Plus Version 2.2.4 Management Software Web Browser User’s Guide
211
Disabled: The TACACS+ servers do not use its enable
password. Authentication is attempted using the password
specified using the ENABLE PASSWORD command in the CLI.
AAA Authentication Enable Local— Enable or disable
TACACS+ to authenticate users requesting the Privileged Exec
mode. Choose from the following:
Enabled: The TACACS+ determines whether users can
access the Privileged EXEC level using TACACS+ enable
password. When any TACACS+ server is not available,
authentication is attempted using the password specified using
the ENABLE PASSWORD command in the CLI.
Disabled: The TACACS+ servers do not use its enable
password. Authentication is attempted using the password
specified using the ENABLE PASSWORD command in the CLI.
AAA Accounting— Select a TACACS+ accounting setting.
Choose from the following:
Start-Stop: Indicates that a start accounting message is sent at
the beginning of a session and a stop accounting message is
sent at the end of the session.
Stop-Only: Indicates a stop accounting message is sent at the
end of the session.
None: Indicates that sending accounting messages is
disabled.
5. Click Apply.
The Active Authentication Server field shown on the upper middle of
the page indicates “TACACS+.”
6. Click SAVE
to save your changes to the startup configuration file.
Adding a
TACACS+
Server
To add a TACACS+ server, do the following:
1. Click Add
at the bottom of the page.
The TACACS+ Add page is displayed. See Figure 75 on page 212.