AlliedWare Plus Version 2.2.4 Management Software Web Browser User’s Guide
347
Figure 148. sFlow Collector Page
5. Enter the following fields:
IP Address— Enter the IPv4 address of the sFlow collector on
your network. Enter the IPv4 address in the following format:
xxx.xxx.xxx.xxx
where x is a number from 0 to 255. There are four groups of
numbers that are separated by periods.
UDP Port— Enter the UDP port number of the sFlow collector. The
default is UDP port 6343.
6. Click Apply.
7. Click SAVE
to save your changes to the startup configuration file.