Filter
Top Products
Chapter 10: Setting Static Port Trunks
132
Figure 49. Add Static Trunk Page
5. Assign an ID number of a new static trunk in the Trunk ID field. The
range is 1 to 32.
6. Select the Load Balance Method. You can assign different load
distribution methods to different static trunks on the same switch.
Choose from the following:
Src MAC— Specifies source MAC address as the load distribution
method.
Dst MAC— Specifies destination MAC address as the load
distribution method.
Src-Dst MAC— Specifies source address and destination MAC
address as the load distribution method.
Src IP— Specifies source IP address as the load distribution
method.
Dst IP— Specifies destination IP address as the load distribution
method.
Src-Dst IP— Specifies source address and destination IP address
as the load distribution method.