Filter
Top Products
Chapter 19: Setting IPv4 and IPv6 Addresses
234
Adding an IPv4 Address
To assign an IPv4 address, do the following:
1. Select the Layer 3 tab.
The Layer 3 tab is displayed. See Figure 84 on page 232.
2. From the Layer 3 tab, select IPv4 Interfaces.
A list of IPv4 interfaces is displayed. See Figure 85 on page 232.
3. Click Add
.
The IP Address Configuration Page is displayed. See Figure 86.
Figure 86. IP Address Configuration Page
4. Enter the following fields:
IP Address— Enter the IP address that you want to add.
Subnet Mask— Enter the subnet mask of the IPv4 address in
quad-dotted decimal representation, for example, 255.255.255.0.