Filter
Top Products
AlliedWare Plus Version 2.2.4 Management Software Web Browser User’s Guide
129
Displaying Static Trunk Settings
To display the static port trunks for all of the switch ports, do the following:
1. Select the Switching tab.
The Switching tab is displayed. See Figure 24 on page 69.
2. From the Switching tab, select Link Aggregation.
For an example of the Link Aggregation tab, see Figure 47.
Figure 47. Switching Tab with Static Trunks
3. Move the cursor to the right and select Static Trunks.
The Static Trunks page is displayed as shown in Figure 48. By default,
no static trunks are specified on the switch.
Figure 48. Static Trunks Page