Filter
Top Products
AlliedWare Plus Version 2.2.4 Management Software Web Browser User’s Guide
241
Adding an IPv6 Address
The switch supports only one IPv6 address. As a result, you can add an
IPv6 address only when no IPv6 address is assigned to the switch.
To assign an IPv6 address, do the following:
1. Select the Layer 3 tab.
The Layer 3 tab is displayed. See Figure 88 on page 239.
2. From the Layer 3 tab, select IPv6 Interface.
The IPv6 Interface page is displayed. Ensure that no IPv6 address is
displayed.
3. Click Add
.
The IP Address Configuration Page is displayed. See Figure 90.
Figure 90. IPv6 Management Configuration Page
4. Select a VLAN to the IPv6 address by using the pull-down menu next
to the Interface Name field.