Filter
Top Products
Chapter 20: Access Control Lists (ACL)
254
Destination Address— Enter a destination address to match
ingress packets. Enter one of the following:
The keyword “any:” Matches all packets on the destination
address.
IPv4 Address and mask: Enter an IPv4 source address
followed by an slash (/) and a mask if you are creating an IPv4
ACL.
MAC Address and mask: Enter an MAC source address
followed by an slash (/) and a mask if you are creating a MAC
ACL.
Note
The Source Port and Destination Port fields are applicable only for
IPv4 ACLs.
Source Port— Select TCP or UDP from the pull-down menu and
enter a source port number as needed. This field is optional.
Destination Port— Select TCP or UDP from the pull-down menu
and enter a source port number as needed. This field is optional.
VLAN ID— Enter a VLAN ID. Use this field if you want the ACL to
filter tagged packets. This field is optional.
Note
The matching criteria of CoS and DSCP are for the Quality of
Service (QoS) feature. For information about creating a QoS, see
“Creating a QoS Policy” on page 271.
5. Click Create Classifier.
6. Click SAVE
to save your changes to the startup configuration file.