Filter
Top Products
Chapter 25: LLDP and LLDP-MED
322
Assigning LLDP Locations to a Port
Use a Civic, Coordinate, or ELIN location IDA port location to assign to a
port. You must create these location IDs before you assign a port location
to a port. For instructions to create location IDs, see “Setting a Location
Entry for the LLDP-MED Location TLV” on page 312.
To set an LLDP port location, do the following:
1. Select the Discovery & Monitoring tab.
The Discovery & Monitoring tab is displayed. See Figure 123 on
page 302.
2. From the Discovery & Monitoring tab, select LLDP.
The LLDP tab appears on the right.
3. From the LLDP tab, select Port Locations.
The LLDP Port Location page is displayed. See Figure 137.
Figure 137. LLDP Port Location Page
4. Click Edit
next to the port that you want to modify.
The Modify LLDP Port Location page is displayed. See Figure 138 on
page 323.