Filter
Top Products
AlliedWare Plus Version 2.2.4 Management Software Web Browser User’s Guide
29
Version— Indicates the software version number of the
AlliedWare Plus Management Software.
Contact— Indicates the contact person for the switch. To specify
this field, see Setting the Switch Information.
Location— Indicates the location of the switch. To specify this
field, see Setting the Switch Information.
The Services section displays the following information:
IPv6 Management— Indicates if the IPv6 Management is enabled
or disabled on the switch.
SNMP— Indicates the SNMP setting of the switch.
HTTP— Indicates the HTTP setting of the switch.
Telnet— Indicates if Telnet is enabled or disabled on the switch.
SSH— Indicates if SSH is enabled or disabled on the switch.
Remote Logging— Indicates if the remote logging is enabled or
disabled on the switch.
Spanning Tree— Indicates if STP, RSTP, or MSTP is enabled on
the switch. The default setting is “RSTP.”
QoS— Indicates if QoS is enabled or disabled on the switch.
LLDP— Indicates if LLDP is enabled or disabled on the switch.
sFLOW— Indicates if sFlow is enabled or disabled on the switch.
IGMP Snooping— Indicates if IGMP Snooping is enabled or
disabled on the switch.
IGMP Snooping Querier— Indicates if IGMP Snooping Querier is
enabled or disabled on the switch.
802.1x Port Authentication— Indicates if 802.1x Port
Authentication is enabled or disabled on the switch.
RIP— Indicates if RIP is enabled or disabled on the switch.
The Administration Options section displays the following information:
System Upgrade— Select this field to upgrade your system
software. See “Upgrading the Software” on page 60.
Reboot— Select this field to reboot the switch. For instructions,
see “Rebooting a Switch” on page 59.